GTS-20 utilizes a proprietary optical fiber image analysis algorithm to automatically detect defects (uneven end faces, fiber fragmentation, debris, excessive cutting angles) and adjust welding parameters, minimizing anomaly impacts. Signal loss is controlled below 0.04dB, with a one-time welding success rate exceeding 98%. The system monitors V-groove cleanliness, alerting users to clean and recalibrate tools for optimal quality. Integrated temperature and barometric pressure sensors, paired with environmental adaptation algorithms, enable stable, high-performance operation in any condition without manual intervention.

Features: 

·         4.3 inch LCD color touch screen.

·         Automatic and manual splicer mode

·         Splicer time: 6 seconds (fast mode)

·         Battery capacity: 5200mAh

·         Ability to save 20,000 groups of splicer results, 2000 images

·         Splicer program: 500 splicer programs

·         Heating program: 200 heating program

·         Electrode life: > 5000 times

Technical Specifications – GTS-20  Fusion Splicer

Overview

·         Model: GTS-20

·         Motor: Four motors controlled in 2-axis (X-Y) directions

·         Image Magnification: X, Y, XY, X/Y ~ 380X

·         Discharge Calibration: Real-time (manual adjustment available)

·         Optional Extension Modules: OPM / VFL 

Optical & Physical Features

·         Applicable Fiber Types: SM, MM, DS, NZ, NZDS (including G651, G652, G653, G654, G655, G657…)

·         Cleave Length: 5 ~ 16 mm

·         Cleaved Diameter: 0.1 ~ 3 mm

·         Cladding Diameter: 80 ~ 150 µm

·         Typical Splice Loss:

§  SM: 0.02 dB

§  MM: 0.01 dB

§  NZ: 0.03 dB

§  NZDS: 0.04 dB

·         Return Loss: ≥ 60 dB

Splicing & Protection Functions

·         Splice Modes: 500 preset programs

·         Heating Modes: 200 preset heating programs

·         Typical Splicing Time: 7 seconds (Fast mode: 6 seconds)

·         Typical Heating Time: 18 seconds (adjustable)

·         Auto Heating: Supported

·         Discharge Electrode Lifetime: ≥ 5,000 discharges

·         Tensile Test Strength: 1.96~2.1 N

·         Splice Protector: 20–60 mm, SOC (optional)

Interface & Storage

·         Display: 4.3” high-definition capacitive touch LCD

§  Anti-reflective coating

§  Dual control via key/touch

·         Storage: Up to 2,000 images, 20,000 data groups

·         User Interface: GUI with graphical maintenance and navigation support

Power & Battery

·         Battery Capacity: 5,200 mAh

·         Battery Performance: Up to 340 splicing and heating cycles per charge

·         Power Supply: AC 100–240V, DC 15–19V

Environmental Conditions

·         Operating Altitude: 0 ~ 5,000 m

·         Operating Temperature: -20°C to +50°C

·         Wind Resistance: Up to 15 m/s

·         Humidity: 0 ~ 95% (non-condensing)

·         Storage Conditions:

§  Humidity: 0 ~ 95%

§  Temperature: -40°C to +80°C

Connectivity & Dimensions

·         Ports: USB 2.0, Type-C

·         Dimensions: 205 mm x 134 mm x 102 mm

·         Weight:  With battery: 1.5 kg